Reaper Bones 80008 Rosie, Chronotechnician

It's been months since I did anything with my Five Parsecs From Home campaign. Sizing things up, there's three things I need to continue and a substitute miniature for Lin is the easiest to check off the list. Lin, previously represented by Rosie, Chronotechnician from Reaper's Chronoscope line, failed to repair her signature Brutal Melee Weapon and will be wielding a more conventional weapon for the next fight. Fortunately, I received the Bones version of her miniature as a reward from the first Reaper Bones Kickstarter.

I didn't want to simply reproduce my previous paint scheme on this figure. First, it's boring. Second, a quick change of clothes along with the weapon makes sense for the character. Third, it would allow me to use the figure as a different character later on.

Lin's got a loaner weapon until her big wrench gets fixed.

Base

I glued the integral base to a spray primed steel fender washer. The gap was filled after painting the miniature with a variant on my standard basing mix. This variant adds black rather than brown craft paint to a mix of sand, PVA glue, and a little water to improve flow. Some gray drybrushed on after the basing mix dried completes the industrial look of the base.


Preparation

The same approach I use for all white Bones plastic. Details are at the end of this link.


Skin

Menoth White Base

This with a wash creates a pale skin tone. I've never been happy with this approach and moved away from it, but used it here to match the Chronoscope version I painted before.


Shirt

Reaper 09017 True Blue

This is a bright blue that coats well. As the shirt is a small, flat area, I didn't feel the need to paint any highlighting over what the wash I applied later would provide.


Weapon

Citadel Colour Chaos Black
Citadel Colour Codex Grey
Army Painter Warpaints Quickshade Dark Tone

Not the neatest or fanciest approach, but one that brings out the mechanical details.


Overalls

Reaper 09158 Olive Drab
Reaper 09177 Camouflage Green

These are darker and lighter versions of an olive green camouflage color. They work well paired as a base and highlight.


Leather

Reaper 09284 Lonestar Leather
Reaper 09110 Oiled Leather

This is the same combination I used for the leather on the metal version and has become my go-to for a base and highlight combination.


Hair

Reaper 09183 Cloud Pink
Citadel Washes Baal Red

Again, the same combination I used for the metal version. To my surprise, the Baal Red was still perfectly viable, but most red washes should work fine.


Wash

Army Painter Warpaints Quickshade Strong Tone

Everything except for the hair and weapon got a coat of this wash slapped on it. Again, this reproduces my approach to the metal version and remains how I paint Bones plastic.

Bones (plastic) version on the left, Chronoscope (metal) version on the right.

Chronoscope and (Early) Bones Comparison

This is a chance to compare the metal and plastic versions of the miniature. To my mild surprise, I haven't actually painted the same sculpt in two different materials before.

The details of the Chronoscope version are sharper and better defined when compared to the Bones version. This is the expected finding. The soft white plastic used in the initial waves of Bones doesn't seem to be able to retain fine detail like metal or the harder gray plastic that Reaper switched to later on. The difference in detail is significant. The face is less detailed and the goggles are a muddy mess. It made for a less pleasant painting experience as I kept hunting for details that I knew were there on the metal version.

A comparison between the metal and plastic versions is incomplete without discussing pricing. Here are the prices in USD at the time of this writing:

Reaper Bones 80008 Rosie, Chronotechnician $3.99 (USD)
Reaper Chronoscope 50016 Rosie, Chronotechnician $5.99 (USD)

The plastic version can be picked up for two-thirds the price of the metal one. However, two bucks isn't a huge price difference in absolute terms. It comes down to personal preference. Is the difference in detail worth paying a little extra? The Bones version wouldn't be my first choice as a hero miniature or display piece. Which material is the buyer more comfortable working with? Metal and plastic demand different approaches. A painter set up for one material may not wish to adapt to the other.

Bones (plastic) version on the left, Chronoscope (metal) version on the right.

Bones - even early Bones - do have a place. Most of my Bones collection is from the first Kickstarter and is therefore the white plastic from the beginning of the line. All of the ones I've painted are serviceable when painted to a tabletop standard. The majority of the figures are monsters or other opposition that will only be on the table as long as the players allow them to survive. Also, a Bones figure makes for a fun "rainy day" painting experience. The work goes quickly since I don't stress much about getting the best results possible like I might with a metal, resin, or higher quality plastic figure.

In the end, comparing this figure to its metal counterpart didn't change my option on early Bones miniatures. They are a cost effective option for the kinds of miniatures meant to be used in bulk. Orcs or zombies? Oh, yeah, I'm going for the white plastic Bones versions. Likewise, large miniatures are much more practical in any form of plastic when compared to metal. However, I'm happy to shell out a little more for a centerpiece miniature of metal, resin, or higher quality plastic that I'm painting to look the best I can manage.